Wiki guide · Community guide

How to Add Drill Rods and Finish a Borehole

Extend the DR-64 drill string when the head reaches the end of its travel, then pull the rods and finish the hole before moving the truck.

Add a rod at the end of the drill head’s travel

Start with the DR-64 parked at the hole and set up for drilling. See how to park, stabilize and raise the mast.

  1. Finish the current stroke. Feed the drill down until the head reaches the end of its travel and the game prompts you for another rod.
  2. Use Add drill rod. Wait for the head to return.
  3. Resume drilling. Feed the drill down again to reach the target depth. If the rack is empty, the game shows a separate maximum-depth warning.

For practice, the second Family Claim tutorial hole at X −6, Z 104 has a 4 m target. The tutorial adds a rod at about 3 m before continuing to that depth.

Pull the rods and prepare to move the truck

At the target depth, use the pull-rods or finish-hole action. Wait until the drill string clears the ground before rigging down. If the game blocks rigging down, check whether the rods have finished withdrawing.

For the short tutorial move, lift the stabilizers before driving slowly to the next marked hole with the mast raised. Lower the stabilizers again before drilling. Stow the mast for travel in the truck’s transport configuration.

Open the borehole log on the Gold Map to check which layers the finished hole passed through.

Next guideCompare borehole logs on the Gold Map