Wiki guide · Community guide
How to Set Up the Family Claim Washplant
Set up the starter mobile trommel, route water from the river to the pond, and get the generator and conveyor ready for your first wash run.
Find the starter wash equipment
The Family Claim tutorial uses two water pumps, a generator trailer, a mobile gold trommel and a small conveyor. On the starting map, the trommel is at X −25.5, Z 124 and the conveyor is at X −33.5, Z 120.5. The starter equipment map links open the exact locations.
Unhitch the trommel if necessary, use its setup action and wait for the legs and sluice to unfold. Position the generator close enough to supply the trommel.
Fill the pond and supply the trommel
- River to pond. Submerge Pump 1’s intake in the river and run its discharge to the pond. Start the pump and watch the pond level.
- Pond to trommel. Submerge Pump 2’s intake in the pond and connect its discharge to the trommel inlet. Start Pump 2 once its intake is under water.
- Power the trommel. Park the generator trailer beside the trommel, start it and wait for the trommel to receive power.
Use the hose connection guide to identify the intake and discharge fittings. If the trommel gets no water, check the pond level and Pump 2 first, then trace both hoses all the way to the inlet.
Start the wash line before feeding the first load
- Load the conveyor with its feed stopped. Use the receiving hopper and follow the tutorial’s first-load objective.
- Start the trommel. Check that the drum and spray bar are running. If water is missing, recheck the pump and hose route.
- Start the conveyor. Feed the load once the trommel is washing. Check that the tailings have a clear path to the receiving truck bed or conveyor intake if you are using one.
After washing the batch, follow the sluice concentrate and shaking table guide.