Wiki guide · Community guide
Where to Find Shallow Grade 8 Gold
Open two surface-level Grade 8 gold locations on MAIN MAP v2, then use the map’s depth filters and cross-sections to check a dig.
Two Grade 8 spots at the surface
Try X −350, Z 299 in seam #2 or X −131, Z 352 in seam #9. In the starting terrain grid, both points have 0 m of cover, 2.55 m of Grade 8 material below the surface, and no recorded water above the sampled cell. Each link opens a 10 m cross-section centered on the spot.
| Seam | X | Z | Saved map view |
|---|---|---|---|
| #2 | −350 | 299 | Open the seam #2 cut |
| #9 | −131 | 352 | Open the seam #9 cut |
Find more shallow Grade 8 locations
- Open the interactive gold map and expand Best easy digs.
- Set the minimum grade to 8 and the depth limit to 1 m. Keep Dry ground only checked if you want to skip cells with recorded water.
- Select Find dig spots, then open a result to inspect its location and cross-section. Check the depth on both sides of your planned cut.
Read the depth before you dig
Dig depth tells you how much cover you have to remove. Thickness measures the gold-bearing layer below that cover. Along the saved seam #2 cut, the sampled depth ranges from 0 to 0.7 m. Along the seam #9 cut, it ranges from 0 to 1.075 m. The center points start at the surface in both views.
Use Dig depth to compare cover along the cross-section, then switch to Elevation if you need to read the terrain and water. If you’ve already worked the area, drill a test hole to check your current ground. See the ranked seams table for larger deposits and their wider depth ranges.